Week of September 27, 2021 | Fuel Silo Bin Grading
OneOFive: Compacting and backfilling around to Cyclopentane tank. Grading of dirt inside the Hog Fuel Bin. Installing Kiln curb forms.
RobWel: Welding drain piping on the Pipe Bridge. Welding pipe at the Kiln. Hydrovacing at the Kiln to expose 30” pipe. Pull glycol lines through 30” pipe at the Kiln. Walk down vent piping. Starting the Lube Oil flush.
Techmation: Installing light fixtures on the TOP. Working on punches on the TOP.
CAW: Loop checking and programing in the TOP E-House.
Thomas Kanata: Installing scaffolding on the west side of the TOP. Installing insulation at the Emergency Cooler. ... See MoreSee Less
Week of October 04, 2021: Fuel Silo Bin Forming/Prep.
OneOFive: Working on deficiencies on the Hog Fuel Bin. Pouring the Control Room curb at the Kiln.
RobWel: Working on deficiencies on the TOP (Thermal Oil Plant). Rerouting of the Fill Drain piping. Unloading trucks (Grinder and glycol piping). Hydro test preparation at the TOP. Installing HV Circuit Breaker frame in the Substation.
Techmation: Grounding on the Substation fence. Pulling cables and terminating in the ORC (Organic Rankine Cycle) Turbine Hall. Working on deficiencies on the TOP.